Table of Contents
Advertisement
3.2.1.1
SMART ON/OFF SYSTEM: ON/OFF BUTTON + RFID SYSTEM
.
Note
2
3
.
Note
OM-0481R1
To turn the unit ON, proceed as described in the following steps:
1.
Press and hold the ON/OFF button (1) for a few seconds; the System
ON/OFF Indicator (2) will blink white for 5 seconds.
When the Mobile Unit is in Charging Mode it is not necessary to
press the ON/OFF button in the first instance.
2.
Within 5 seconds from turning the unit ON, pass the RFID Card (5) over
RFID Reader symbol (4), there is no need to contact the reader. The
system emits a double beep, the ON/OFF Indicator (2) will light cyan and
the Battery Charge Level Indicator (3) will light according to the current
battery status.
3.
When the system is ON the System ON/OFF Indicator (2) will light white.
1
4
The system emits 3-beeps and the System ON/OFF Indicator (2)
blinks orange to indicate a wrong RFID Card. In this case, repeat
the ON/OFF process using the right Card.
5
Mobile X-ray Unit
Operation
49
Advertisement
Table of Contents
