Table of Contents
Advertisement
.
Note
.
Note
OM-0481R1
WHEN NOT GENERATING X-RAYS, KEEP THE UNIT
CONNECTED TO THE MAINS, EVEN WHEN BATTERIES ARE
FULLY CHARGED. THIS ENSURES MAXIMUM STORAGE
ENERGY.
Connect the Power Line Cable to the mains in order to allow the Charging
Circuits to charge the Batteries.
When the Unit is ON and plugged into the mains, a "Lightning" icon
appears on the Control Console (next to the Batteries Indicators)
to display that the battery is charging.
This "Lightning" icon will disappear from the Control Console when
the Unit is unplugged from the mains.
For further information about Batteries Status Indicators, refer to
Section 4.2.3.
The Power Line Cable can only be replaced by the Service
Engineer.
Mobile X-ray Unit
Operation
45
Advertisement
Table of Contents
