Konica Minolta mKDR Xpress Operation page 58

Mobile X-ray Unit
Operation
.
Note
50
The RFID Card is detected automatically by the system.
Depending on the system permissions assigned to each RFID Card, the user
can perform the following actions:
 Movements:
It allows the user to drive the system in Parking position.
When the system is out of the Parking position, it allows the user to
move the Column and the Arm in order to put the system in parking
position.
 Panel Out:
It allows the user to unlock the system from the Parking position and
to move the Arm and the Column in order to get access to the
Detectors.
 X-Rays:
It allows the user to perform any action needed for Radiographic
Operation.
 Admin:
It includes all the previous permissions for Movements; Panel Out,
X-Rays, and the following User Administrator permissions:
G RFID Cards administration:
For registering new cards and for adding, disabling or modifying
the RFID card permissions.
G Usability Settings:
To configure Sound settings, Visual settings, Anticollision
settings, Power OFF settings (for further information, refer to
section 3.2.9 of Power OFF Settings).
G Maintenance:
Useful to consult License data and logs compilation.
OM-0481R1