Proximity Sensors - Konica Minolta mKDR Xpress Operation

Mobile X-ray Unit
Operation
Magnetic Hubcap
3.6.1.4

PROXIMITY SENSORS

Proximity Sensors
.
Note
.
Note
74
Use the Allen Wrench to remove the Clutch Screws (x2) of each wheel.

This will uncouple the wheels from the motors (releasing the brakes)
allowing the free motion of the unit.
PROXIMITY SENSORS ARE NOT A SAFETY SYSTEM OR AN
ANTI-COLLISION MECHANISM, BUT A DRIVING AID SYSTEM
THAT ACTS BY REDUCING THE SPEED AND ALERTING THE
USER WHEN AN OBSTACLE IS DETECTED.
The Proximity Sensors located under the Front Bumper, reduce the system
speed when detecting an obstacle, at a configured distance.
The system alerts the user with the Status Light Indicator blinking white.
Distance and Status Light Indicator can be configured by the
Service Engineer.
For further information, refer to Section 3.2.10 of Status Light
Indicators.
Proximity Sensors are automatically deactivated by activating the system
motion controls, once the obstacle has been avoided.
Clutch Screws (circled)
OM-0481R1