Movement Controls; Column And Telescopic Arm Movements - Konica Minolta mKDR Xpress Operation

3.6.3

MOVEMENT CONTROLS

3.6.3.1

COLUMN AND TELESCOPIC ARM MOVEMENTS

1 Handgrips
.
Note
OM-0481R1
Head-Assembly Handgrips have a Brake Control that releases or locks Column
rotation and vertical and telescopic Arm movements. This control also releases
the Arm Catch when in Parking position.
Hold the Handgrips to activate the Brake Control to move the Column and Arm
until the Head-Assembly is positioned. Release the control to lock in place.
ALWAYS USE THE HANDGRIPS TO CONTROL AND DRIVE
THE COLUMN AND ARM MOVEMENTS, NEVER PUSH
DIRECTLY ON THE HEAD-ASSEMBLY OR COLLIMATOR.
CAREFULLY DRIVE THE COLUMN AND ARM MOVEMENTS
AVOIDING ANY POSSIBLE COLLISION WITH THE PATIENT,
THE DETECTOR, THE CONTROL CONSOLE SCREEN OR
ANY OTHER PART OF THE EQUIPMENT OR OTHER
ELEMENTS AROUND IT.
The Column can rotate from its Parking position: ¦317
The Arm allows a vertical travel of 1490 mm.
For further information, refer to Section 8.3 of Physical
Characteristics.
Mobile X-ray Unit
Operation
1
o
.
77