Table of Contents
Advertisement
Mobile X-ray Unit
Operation
3.6.3.2
HEAD-ASSEMBLY MOVEMENTS
1
.
Note
Illustration 3-5
Head-Assembly and Collimator Movements
78
Press the black buttons located on the Handgrips to rotate the Head-Assembly
from its vertical position:
o
on its transversal axis, i. e. roll rotation (see Illustration 3-5, A).
¦180
This movement has detents at --90
The angle can be indicated on the Head-Assembly Screen (2).
120_ on its horizontal axis, i. e. pitch rotation (see to Illustration 3-5, B).
2
This movement has detents at 0
The angle is indicated in the Inclinometer (1) located on the
Head-Assembly Support and on the Head-Assembly Screen (2).
Refer to Section 3.6.3.3 for Collimator movements, and Section
4.2 for information on the Head-Assembly Console.
A
o
¦180
o
o
, 0
and +90
o
, and it has stops at +90_, 0
120
o
¦90
C
o
o
, and at --180
and 180
o
and -- 30_.
B
o
OM-0481R1
o
.
Advertisement
Table of Contents
