System Off - Konica Minolta mKDR Xpress Operation

3.2.2

SYSTEM OFF

.
Note
.
Note
OM-0481R1
Place the unit in the Parking position right after turning the
system OFF since positioning controls will remain enabled
for 15 seconds approximately.
After turning OFF the unit, wait at least 10 seconds before turning
it ON again. This action assures a safely start-up of the system.
To turn the Unit OFF, proceed as described in the following steps:
1. Turn OFF the system from the Control Panel, by holding pressed the
ON/OFF button for 3 seconds approximately.
Smart ON/OFF System
2. The system ON/OFF Indicator will light cyan for a few seconds and then,
the system will be turned OFF.
Smart ON/OFF System
If the system does not turn OFF after pressing the ON/OFF button
for 3 seconds, try it again by holding pressed the ON/OFF button
for 12 seconds approximately; it will turn OFF the system safely.
Mobile X-ray Unit
Keypad System
Keypad System
Operation
53