Konica Minolta mKDR Xpress Operation page 134

Mobile X-ray Unit
Operation
ID
300002 Positioner configuration could not be loaded
300003 Switches configuration could not be loaded
300006 Generator configuration could not be loaded
300007 Workstations configuration could not be loaded
300008 Image receptors configuration could not be loaded
300009 Positioner disconnected
300010 Console disconnected
300011 Generator disconnected
300012 Workstation mismatch for Generator and Positioner
Active Procedure mismatch for Generator and
300013
Positioner
300014 Positioner configuration could not be loaded
300015 Configuration changes could not be saved
300016 Initializing communications ...
300019 Generator working in Service mode
300020 Positioner working in Service mode
300021 Could not verify Service access
300024 Usability settings configuration could not be loaded
300025 Layout settings calibration data could not be loaded
300029 Snapshots in progress
The exposure settings have been modified during
calibration. Please make sure to recover the
300031
exposure settings from the Image System
application.
126
DESCRIPTION TYPE
Error Error Call Service Call Service.
Error Call Service.
If the error appears during start- -up, please wait. If it is
not the case, restart the System and try to repeat the
Error
operation. If the error persists, call Service.
Restart the System and try to repeat the operation. If Restart the System and try to repeat the operation. If
Error Error
the error persists, call Service
Try to select another workstation or another
radiographic procedure.
Error
If the error persists, restart the System and try to
repeat the operation.
If the error persists, call Service
Error Call Service.
Error - -
If message does not disappear after the start- -up is
Information
finished, call Service
Warning Please restart the System
Warning Please restart the System
Warning - -
Error Error Call Service. Call Service
Inhibit If the message does not disappear in a period of time,
Exposure please restart the System.
Inhibit Recover the exposure settings from the Image System
Exposure application.
USER HELPTEXT
OM-0481R1