General And Motion Controls - Konica Minolta mKDR Xpress Operation

SECTION 3
.
Note
OM-0481R1

GENERAL AND MOTION CONTROLS

Operation is carried out from the different controls:
Control Panel, with controls to turn ON/OFF the system, System ON/OFF

Indicator, Battery Charge Level Indicator, Emergency Switch OFF.
Control Console Screen; Head-Assembly Screen.

X-ray Handswitch; Infrared Remote X-ray Handswitch (option).

Controls for the unit motion and controls for Telescopic Column and Arm

movements.
Manual Collimator Panel with controls for opening or closing the

Collimator Blades and to switch ON the Collimator Light.
FOR THE CORRECT OPERATION OF THE X-RAY MOBILE
UNIT, THE USER MUST HAVE DRY HANDS WHEN WORKING
WITH THE SYSTEM.
DO NOT USE OR DRIVE THE SYSTEM WITH WET HANDS OR
IMPREGNATED WITH DISINFECTANT GEL OR ANY OTHER
SUBSTANCE OR LIQUID, SPECIALLY WHEN USING THE
CAPACITIVE TOUCHSCREEN (MAIN SCREEN AND/OR
HEAD-ASSEMBLY SCREEN) AND WHEN MANAGING THE
CAPACITIVE
HEAD-ASSEMBLY
SUBSTANCES COULD CAUSE SYSTEM MALFUNCTION
AND/OR AN INCORRECT OPERATION OF THE MOTION
CONTROLS.
IN THIS CASE, TURN OFF THE UNIT AND CLEAN THE
AFFECTED PARTS.
For further information about Cleaning and Disinfection, refer to
Section 7.1.3.
MOVEMENT CONTROLS
HANDGRIPS);
Mobile X-ray Unit
Operation
(HANDLEBAR,
OTHERWISE, THESE
41