Infrared Remote Control (Option) - Konica Minolta mKDR Xpress Operation

Mobile X-ray Unit
Operation
3.5

INFRARED REMOTE CONTROL (OPTION)

.
Note
.
Note
5
66
The unit cannot perform exposures when the Column is in Parking
position; it only can perform exposures out of the Parking position.
DURING AN EXPOSURE, THE IR REMOTE CONTROL MUST
BE POINTED DIRECTLY AT THE MOBILE UNIT AT ALL TIMES.
The Infrared Remote Control permits the operator to perform exposures at a
distance from the X-ray beam (Head-Assembly) to protect against radiation.
When not in use, place the Infrared Remote Control back into the cradle in order
to charge the battery; the Status LED lighting cyan indicates that the Remote
Control has been placed in the correct position and its battery is charging (the
light will remain on as long as the IR Remote Control is stored in its cradle).
A System Message will be displayed on screen when the IR
Remote Control is not placed into its cradle.
A Service Engineer may set the time it would take to display this
informational message, as well as whether it is accompanied by
an acoustic signal (discontinuous beeping).
4
1 Infrared Remote Control
2 Cradle
3 LED: Correct placement and
1
battery charge indicator
4 IR Emitter
5 IR Receiver Sensor
2
3
OM-0481R1