Konica Minolta mKDR Xpress Operation page 119

ID DESCRIPTION
140316
Generator DSP Control. IGBT bridge fault branch Generator DSP Control IGBT bridge fault branch
140317
140318 Generator DSP Control. kV out of range
140319 Generator DSP Control. mA Overcurrent
Generator DSP Control. Undercurrent in small
140320
filament during exposure.
Generator DSP Control. Undercurrent in the power
140321
converter using small filament during exposure.
140322
Generator DSP Control. Overcurrent in small Generator DSP Control. Overcurrent in small
filament.
140323
Generator DSP Control. Small Filament Current out
140324
of range
Generator DSP Control. Fault on small filament
140325
inverter.
Generator DSP Control. Thermal fault on small
140326
filament inverter.
Generator DSP Control. Undercurrent in large
140330
filament during exposure.
Generator DSP Control. Undercurrent in the power
140331
converter using large filament during exposure.
140332
Generator DSP Control. Overcurrent in large Generator DSP Control. Overcurrent in large
filament.
140333
Generator DSP Control. Large Filament Current out
140334
of range
Generator DSP Control. Fault on large filament
140335
inverter.
OM-0481R1
TYPE
Press Accept.
Error Error If the error persists restart the System If the error persists, restart the System.
If the error persists, call Service.
Press Accept. If the error persists, restart the System
and reduce power of the exposition. If the error
persists, call Service.
Error Error
Press Accept. If the error persists, restart the System
and reduce mA of the exposition. If the error persists,
call Service.
Press Accept. p
Error If the error persists, restart the System.
If the error persists, call Service. If the error persists call Service
Restart the System. y
Error Error
If the error persists, call Service.
Press Accept.
If the error persists, restart the System. If the error persists restart the System
Error E
If the error persists, call Service.
Mobile X-ray Unit
Operation
USER HELPTEXT
111