Konica Minolta mKDR Xpress Operation page 37

GUIDANCE AND MANUFACTURER'S DECLARATION - ELECTROMAGNETIC EMISSIONS
This X-ray System is intended for use in the electromagnetic environment specified below.
The customer or user of this X-ray System should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/flicker emissions
IEC 61000-3-3
NOTE - In accordance with Standard IEC 60601-1-2:2014, the emissions characteristics of this equipment make it suitable for use in industrial areas and
hospitals (CISPR 11 Class A). If it is used in a residential environment (for which CISPR 11 Class B is normally required) this equipment might not offer
adequate protection to radio-frequency communication services. The user might need to take mitigation measures, such as relocating or re-orientating the
equipment.
OM-0481R1
(IEC 60601-1-2:2007 AND IEC 60601-1-2:2014)
Compliance
Group 1
Class A
Class A
Complies
Mobile X-ray Unit
Electromagnetic environment - - guidance
This Mobile Unit uses RF energy only for its
internal function. Therefore, its RF emissions are
very low and are not likely to cause any
interference in nearby electronic equipment.
This Mobile Unit is suitable for use in all This Mobile Unit is suitable for use in all
establishments other than domestic and those
directly connected to the public low-voltage power
supply network that supplies buildings used for supply network that supplies buildings used for
domestic purposes.
Operation
29