System On - Konica Minolta mKDR Xpress Operation

Mobile X-ray Unit
Operation
3.2.1

SYSTEM ON

.
Note
48
The ON/OFF controls are the means to turn the unit ON and OFF.
The unit can operate in Stand-Alone mode, that is, operating
without mains being present or unplugged from mains.
Do not touch any system control during the starting up
process; it could cause system malfunction.
In this case, restart the unit making sure not to touch any part
of the system (switches, touch screens, motion controls, or
any other control).
There are three ways to turn ON the system, depending on the system
configuration:
Smart ON/OFF system: ON/OFF button and the RFID system

(RFID-Card and RFID Card Reader) (refer to Section 3.2.1.1).
ON/OFF button and the Keypad (refer to Section 3.2.1.2).

OM-0481R1