Table of Contents
Advertisement
ERROR
RMT_DSPL
BEEP
Front Panel Reference
Setup Menus
Displays the sub menu that provides the following functions.
•
DISPLAY
Displays the error code and error message, or No Error. A maximum of four
error messages can be stored.
To return to the previous menu, press the
•
CLEAR
Displays the following message. Then, press the
buffer, or press the
Clear Error Buffer: YES
Displays the following message.
Display in Remote Mode: OFF or ON
Press the arrow key to set the remote display mode ON or OFF. Then, press the
key to make the setup effective, or press the
This function changes the display items in the remote mode. If it is ON, the LCD
displays the measured data, setup data, and all status information. If it is OFF
(default setting), the LCD displays only a part of the status information. See
"Display Images" on page 4-3
Note that setting this function ON may adversely affect the performance such as the
measurement speed.
Displays the following message.
BEEP: ON or OFF
Press the arrow key to set the beeper ON or OFF. Then, press the
the setup effective, or press the
4-24
Exit
key to cancel this operation.
Exit
Exit
and
"Status Data Area" on page
key to cancel changing the setup.
Exit
Keysight E5260/E5270 User's Guide, Edition 6
key.
key to clear the error
Enter
key to cancel changing the setup.
4-9.
key to make
Enter
Enter
Advertisement
Table of Contents
