Keysight Technologies E5260 Series User Manual page 120

V/I
Filter
(Shift+V/I)
Front Panel Reference
Front Panel Key Details
Switches the source output mode, voltage output or current output.
Pressing the key changes the output mode immediately. It also changes the
V/I
measurement item as shown below:
Source Output Mode
V (voltage output)
I (current output)
Displays the following message.
[S-ch #] Filter: ON or OFF
where # is 1 or 2 for the 2-ch mainframe, 1, 2, ... or 8 for the 8-ch mainframe.
Press the key to specify the source channel, and press the arrow key to
OutCh
connect the filter (ON) to the channel or disconnect it (OFF). Then, press the
key to make the setup effective, or press the
A filter is mounted on each module. It assures clean source output with no spikes or
overshooting.
4-16
OUT CPL
Voltage Current
Current Voltage
key to cancel changing the setup.
Exit
Keysight E5260/E5270 User's Guide, Edition 6
Meas Data 1 Meas Data 2
Current
Current Voltage
Power
Resistance
Voltage
Voltage Current
Power
Resistance
Enter