Table of Contents
Advertisement
NOTE
WARNING
Safety Summary
The following general safety precautions must be observed during all phases of operation,
service, and repair of this instrument. Failure to comply with these precautions or with
specific warnings elsewhere in this manual may impair the protections provided by the
instrument. In addition, it violates safety standards of design, manufacture, and intended
use of the instrument. Keysight Technologies assumes no liability for customer's failure to
comply with these requirements.
Product manuals may be provided on CD-ROM or in printed form. Printed manuals are an
option for many products. Manuals may also be available on the Web. Go to
www.keysight.com
and type the product model number in the Search field at the top of the
page.
Do not use this instrument in any manner not specified by the manufacturer. The protective
features of this instrument may be impaired if it is used in a manner not specified in the
operation instructions.
This instrument is an INDOOR USE product.
This product complies with OVERVOLTAGE CATEGORY II for mains input and POLLUTION
DEGREE 2 defined in IEC 61010-1.
If an instrument is marked CAT I (IEC Measurement Category I), or it is not marked with a
measurement category, its measurement terminals must not be connected to line-voltage
mains.
Safety of any system incorporating the equipment is the responsibility of the assembler of
the system.
Hazardous voltage of up to the instrument's maximum voltage may appear at High Force,
Guard, and High Sense terminals if Interlock terminal is closed. Open the Interlock terminal
when the High Force, Guard, and High Sense terminals are accessible. Voltage applied to
the terminals will be limited up to ±42 V.
Do not work the interlock function intentionally in order to bring the output voltage to the
safe level. While the high voltage indicator is lit, the dangerous voltage by the output
voltage or the residual charge appears on the measurement terminal.
Advertisement
Table of Contents
