Table of Contents
Advertisement
Front Panel Reference
Setup Menus
Setup Menus
This section explains the following setup menus displayed in the Change Setup area.
•
"Setup Menu"
•
"Calibration and Test Menu"
•
"Measurement Range Setup Menu"
•
"Output Range Setup Menu"
Setup Menu
Press the
key. The setup menu is displayed in the Change Setup area as shown
Menu
in the following example. The setup menu is used to change the GPIB address,
power line frequency, monitor items, data display format, and so on.
-123.456mA
CONFIG
-123.456mA
<WAIT_TIME
Press the arrow key to move the cursor to the desired function name. Then, press the
key. The setup message or the sub menu will be displayed. To return to the
Enter
previous menu, press the
4-18
-1.23456mV
MON_ITEM
DSPL_FRMT
-1.23456mV
ERROR
RMT_DSPL
key.
Exit
Keysight E5260/E5270 User's Guide, Edition 6
OUT:-123.4mV
>
OUT:-123.4mV
BEEP
Advertisement
Table of Contents
