DIAG
Displays the sub menu that provides the following functions.
•
EXECUTE
Displays the following message.
DIAG: Item
where Item is one of the following:
•
GPIB
•
TRIGGER (BNC)
•
KEY
•
HV-LED
•
DGTL-I/O
•
BEEPER
Press the arrow key and the
Table 4-5
to perform the diagnostics; or press the
previous menu without performing diagnostics.
After the diagnostics, the following message is displayed:
DIAG: Pass or Fail or Aborted
Press the
key to return to the previous menu.
Exit
•
RESULT
Displays the following message.
DIAG: Item Pass or Fail Error No. or Not performed yet
where Item is the diagnostics item and Error No. is the error number.
Press the arrow key to display the result of another item.
Press the
key to return to the previous menu.
Exit
Keysight E5260/E5270 User's Guide, Edition 6
GPIB diagnostics
Trigger In/Out diagnostics
Front panel key diagnostics
High voltage LED diagnostics
Digital I/O diagnostics
Beeper diagnostics
key to select the diagnostics item, and refer to
Enter
Front Panel Reference
Setup Menus
key to return to the
Exit
4-29