Table of Contents
Advertisement
Front Panel Operations
Making Measurement
To set integration time
This procedure sets the number of averaging samples of the high-speed A/D
converter or the integration time of the high-resolution A/D converter. The meaning
of the setting value depends on the ADC type and ADC operation mode settings.
The value should be increased for reliable and accurate measurement, or decreased
for high speed measurement. Refer to
for all channels that use the same ADC type.
1. Press the
key and the
Shift
displayed. The message depends on the
2. Press the arrow keys to set the N value for the message.
3. Press the
key if you are setting the value for measurement channels that
MeasCh
use another ADC type, and perform 2.
4. Press the
key to make the setup effective, or press the
Enter
changing the setup.
5-26
Table 4-4 on page
key. The setup message shown in
Integ
and
Integ
Keysight E5260/E5270 User's Guide, Edition 6
4-13. The setup is effective
Table 4-4
settings.
AD
key to cancel
Exit
is
Advertisement
Table of Contents
