Juniper EX4200 Hardware Manual page 181

Table 51: Chassis Viewer for EX4500 Switches (continued)
Field
Console port
Management (me0) port
USB port
Rear View of the EX4500 Switch
Fan tray
Virtual Chassis port
Power supplies
Intraconnect module
Virtual Chassis module
Table 52: Chassis Viewer for EX4550 Switches
Field
Front View
Description
The console port is used to connect the switch to a management console or to a console
server.
The management port is used to connect the switch to a management device for
out-of-band management. Use this port for initial switch configuration.
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks
for your EX Series switch.
Mouse over the fan tray icon to display status of the fans and airflow direction information.
For a Virtual Chassis, the status of the fans of the selected member switch is displayed.
Displayed only when switches are configured as a Virtual Chassis. The colors listed below
denote the Virtual Chassis port (VCP) status:
Green—VCP is up and operational.
Yellow—VCP is up but is nonoperational.
Gray—VCP is down and nonoperational.
Mouse over the power supply icons to display name, status, and description information.
Mouse over the module to display details of the intraconnect module. The intraconnect
module helps the switch achieve line rate on all its ports.
Mouse over to display details of the switches in the Virtual Chassis configuration.
Description
181