Juniper EX4200 Hardware Manual page 175

Table 53 on page 183—Describes the chassis viewer for EX4600 switches.
Table 54 on page 184—Describes the chassis viewer for EX4650 switches.
Table 55 on page 185—Describes the chassis viewer for EX6210 switches.
Table 56 on page 186—Describes the chassis viewer for EX8208 switches.
Table 57 on page 187—Describes the chassis viewer for EX8216 switches.
Table 58 on page 189—Describes the chassis viewer for the XRE200 External Routing Engines.
Table 47: Chassis Viewer for EX2200 Switches
Field
Front View
Interface status
Rear View
Management (me0) port
Console port
USB port
Fan tray
Power supply
Table 48: Chassis Viewer for EX2200-C Switches
Field
Front View
Description
In the image, the following colors denote the interface status:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
The management port is used to connect the switch to a management device for
out-of-band management.
The console port is used to connect the switch to a management console or to a console
server. (You might do this for initial switch configuration.)
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks
for your EX Series switch.
Mouse over the fan tray icon to display name, status, and description information.
Mouse over the power outlet icon to display name, status, and description information.
Description
175