Locating The Serial Number On An Ex4200 Switch Or Component; Listing The Switch And Components Details With The Cli - Juniper EX4200 Hardware Manual

Locating the Serial Number on an EX4200 Switch or Component

IN THIS SECTION

Listing the Switch and Components Details with the CLI | 257

Locating the Chassis Serial Number ID Label on an EX4200 Switch | 258
Locating the Serial Number ID Labels on FRUs in an EX4200 Switch | 258
If you are returning a switch or hardware component to Juniper Networks for repair or replacement, you
must locate the serial number of the switch or component. You must provide the serial number to the
Juniper Networks Technical Assistance Center (JTAC) when you contact them to obtain Return Materials
Authorization (RMA).
If the switch is operational and you can access the CLI, you can list serial numbers for the switch and for
some components with a CLI command. If you do not have access to the CLI or if the serial number for
the component does not appear in the command output, you can locate the serial number ID label on the
physical switch or component (see
NOTE: If you want to find the serial number on the physical switch component, you will need
to remove the component from the switch chassis, for which you must have the required parts
and tools available.
Listing the Switch and Components Details with the CLI
To list the switch and switch components and their serial numbers, enter the following CLI command:
user@switch> show chassis hardware
Hardware inventory:
Item Version
Chassis
Routing Engine 0 REV 11
FPC 0 REV 11
CPU
PIC 0
PIC 1 REV 03B
Figure 69 on page 258).
Part number Serial number
BM0208327733
750-021256 BM0208327733
750-021256 BM0208327733
BUILTIN BUILTIN
BUILTIN BUILTIN
711-021270 AR0208162285
Description
EX4200-24T
EX4200-24T, 8 POE
EX4200-24T, 8 POE
FPC CPU
24x 10/100/1000 Base-T
4x GE SFP
257