Clearance Requirements For Airflow And Hardware Maintenance For Ex4200 Switches - Juniper EX4200 Hardware Manual

69
If you are mounting the switch in sheetrock (wall board with a gypsum plaster core) or in wall board not
backed by wall studs, use hollow wall anchors capable of supporting the combined weight of two fully
loaded chassis. Insert the screws into wall studs wherever possible to provide added support for the chassis.
Use the wall-mount kit from Juniper Networks to mount the switch on a wall. The wall-mount kit is not
part of the standard package and must be ordered separately.
SEE ALSO
Mounting an EX4200 Switch on a Wall | 124
Clearance Requirements for Airflow and Hardware Maintenance for EX4200
Switches
When planning the site for installing an EX4200 switch, you must allow sufficient clearance around the
installed switch (see Figure 21 on page 69).
Figure 21: Clearance Requirements for Airflow and Hardware Maintenance for EX4200 Switches