Packing Ex4200 Switch Components For Shipping - Juniper EX4200 Hardware Manual

Packing EX4200 Switch Components for Shipping

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Chapter 23: Contacting Customer Support and Returning the Chassis or Components
Close the top of the cardboard shipping box and seal it with packing tape.
11.
Write the RMA number on the exterior of the box to ensure proper tracking.
12.
CAUTION: Do not stack switch components. Return individual components
in separate boxes if they do not fit together on one level in the shipping box.
To pack and ship switch components:
Place individual boards in antistatic bags.
Ensure that the components are adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
Close the top of the cardboard shipping box and seal it with packing tape.
Write the RMA number on the exterior of the box to ensure proper tracking.
Returning an EX4200 Switch or Component for Repair or Replacement on page 245
Installing a Fan Tray in an EX4200 Switch on page 207
Removing a Power Supply from an EX4200 Switch on page 213
Removing an Uplink Module from an EX4200 Switch on page 217
Removing a Transceiver from a Switch on page 223
251