Juniper EX4200 Hardware Manual page 165

The status of the member switch is displayed on the image of the switch. If the member switch appears
dimmed, it means the switch is not present, is inactive, or is not provisioned in the Virtual Chassis. If the
member switch does not appear dimmed, it means the switch is present and is active.
Table 43 on page 165 describes the possible status of a member switch.
Table 43: Status of a Member Switch in a Virtual Chassis
If the member switch is
Present
Not present
Inactive
Not provisioned
Click Rear View for a graphical view of the rear panel of the switch.
Click Preferences to choose which panels must be displayed and set the refresh interval for chassis viewer
information. Click OK to save your changes and return to the dashboard or click Cancel to return to the
dashboard without saving changes.
NOTE: You can drag the various panels to different locations in the J-Web window.
It appears as
Prsnt
dimmed and
NotPrsnt
dimmed and
Inactive
dimmed and
Unprvsnd
It means the member switch
Has established physical and logical connections with
Virtual Chassis member switches.
Has been disconnected from the existing Virtual Chassis.
Has established physical connections, but is unable to
establish logical connections.
Cannot synchronize with the existing preprovisioned Virtual
Chassis.
165