Connect A Device To A Management Console Using An Rj-45 Connector - Juniper EX4200 Hardware Manual

Figure 47: Connect a Device to a Network for Out-of-Band Management
To Management Port
(on Device)

Connect a Device to a Management Console Using an RJ-45 Connector

You can configure and manage devices using a dedicated management channel. Each device has a console
port which you can connect to using an Ethernet cable with an RJ-45 connector. Use the console port to
connect the device to the console server or management console. The console port accepts a cable that
has an RJ-45 connector.
Ensure that you have an Ethernet cable that has an RJ-45 connector at either end. One such cable and an
RJ-45 to DB-9 serial port adapter are supplied with the device.
Figure 48 on page 142 shows the RJ-45 connector of the Ethernet cable.
Figure 48: RJ-45 Connector on an Ethernet Cable
NOTE: If your laptop or desktop PC does not have a DB-9 plug connector pin and you want to
connect your laptop or desktop PC directly to the device, use a combination of the RJ-45 to
DB-9 socket adapter supplied with the device and a USB to DB-9 plug adapter. You must provide
the USB to DB-9 plug adapter.
To connect the device to a management console (see
1. Connect one end of the Ethernet cable to the console port (labeled CON, CONSOLE, or CON1) on the
device.
Management
Network
Figure 49 on page 143
Management PC
Management PC
Management PC
and Figure 50 on page 143):
142