Juniper EX4200 Hardware Manual page 238

Table 60: Chassis Component Alarm Conditions on EX4200 Switches (continued)
Chassis
Component Alarm Condition
Media Device booted from
backup root.
/varor /config full (only
10% free).
/var or /config full (only
25% free).
Upgrade bank is empty
or corrupted.
Firmware version is not
the latest.
Single-bit ECC error
detected.
Alarm
Severity Remedy
Minor Open a support case using the Case Manager link at
(yellow) https://www.juniper.net/support/
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
Major (red) Open a support case using the Case Manager link at
https://www.juniper.net/support/
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
Minor Open a support case using the Case Manager link at
(yellow) https://www.juniper.net/support/
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
Major (red) Open a support case using the Case Manager link at
https://www.juniper.net/support/
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
Minor Open a support case using the Case Manager link at
(yellow) https://www.juniper.net/support/
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
Major (red) Open a support case using the Case Manager link at
https://www.juniper.net/support/
1-888-314-5822 (toll-free within the United States
and Canada) or 1-408-745-9500 (from outside the
United States).
238
or call
or call
or call
or call
or call
or call