Connecting The Ex4200 To Power - Juniper EX4200 Hardware Manual

Figure 38: Mounting the Switch on a Wall
Rear panel
Hang attached brackets
on wall-mounted screws.
5. Tighten the mounting screws.
NOTE: If it is an EX4200-24F switch, we recommend you insert dust covers in unused SFP ports.
SEE ALSO
Wall-Mounting Warning for EX4200 Switches

Connecting the EX4200 to Power

IN THIS SECTION
Connect Earth Ground to an EX Series Switch | 127
Connecting AC Power to an EX4200 Switch | 134
Connecting DC Power to an EX4200 Switch | 137
Front
panel
126