Figure 134: Connecting The Positive (+) Power Wire With A Right Angle Terminal - Allied Telesis AT-SBx81CFC400 Installation Manual

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC400 Card Installation Guide
Figure 134. Connecting the Positive (+) Power Wire with a Right Angle
Terminal
7. With a #3 Phillips-head screwdriver, connect the negative (-) power
lead wire to the negative terminal on the power supply, with the
remaining terminal screw removed in step 5. The negative terminal is
on the right. Refer to Figure 135 on page 202.
Allied Telesis recommends tightening the screw to 30 to 40 inch-lbs.
201