Table of Contents
Advertisement
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC400 Card Installation Guide
Figure 85. Removing a Blank Slot Cover
3. Remove the line card from the shipping package. If it is missing or
damaged, contact your Allied Telesis sales representative for
assistance.
Note
Store the packaging material in a safe location. You should use the
original shipping material if you need to return the unit to Allied
Telesis.
4. Carefully remove the Ethernet line card from the anti-static bag. Refer
to Figure 86.
Figure 86. Removing an Ethernet Line Card from the Anti-static Bag
5. Align the line card with the internal chassis card guides in the selected
slot in the chassis.
Figure 87 on page 148 shows an Ethernet line card aligned with slot 1.
147
Advertisement
Table of Contents
