Figure 79: Seating The Expansion Module On The Connector In The At-Sbx81Xlem Line Card; Figure 80: Securing The Expansion Module - Allied Telesis AT-SBx81CFC400 Installation Manual

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC400 Card Installation Guide
Figure 79. Seating the Expansion Module on the Connector in the AT-
10. With a Phillips-head screwdriver, install the two screws from step 4 to
secure the expansion module to the line card. Refer to Figure 80.
Figure 80. Securing the Expansion Module
11. Turn the retaining pin on the side of the line card one quarter turn to
release it. Refer to Figure 81 on page 144.
SBx81XLEM Line Card
143