Table of Contents
Advertisement
Chapter 12: Replacing Modules
258
Figure 164. Sliding the Expansion Module from the AT-SBx81XLEM Line
7. If you are not installing the expansion module in another AT-
SBx81XLEM Line Card, store it in an anti-static bag. Refer to
Figure 165.
Figure 165. Storing the Expansion Module in an Anti-static Bag
8. Do one of the following:
To install a different expansion module in the line card, go to
"Installing Expansion Modules in AT-SBx81XLEM Ethernet Line
Cards" on page 138 and start with step 7.
To install the line card in the chassis without an expansion module,
continue with this procedure.
9. Slide the blank slot cover that comes with the line card into the slot on
the card. Refer to Figure 166 on page 259.
Card
Advertisement
Table of Contents
