Managing Switch Data And Power Settings - Allied Telesis AT-X230-10GP User Manual

Managing Switch Data and Power Settings

Once switches and cameras have been configured, the Milestone XProtect Smart Client can be
used to manage settings easily and conveniently for the Allied Telesis switches and their ports. In the
Smart Client, select the "ATI" tab from the tab bar at the top of the window. Select a switch to
manage from the list at the left side of the window.
The plug-in will display information about the switch, including the hardware model and the currently
running software release. It will also show a list of ports in a table at the upper right, with a summary
of status information:

The Port column shows the name of the port.

The On column indicates whether the port is administratively enabled for data transmission.

The PoE column indicates whether Power over Ethernet is being supplied on the port.

The Power Draw column indicates how much power is currently being drawn by the device
connected to the port.

The Max Alloc column indicates the maximum amount of power the switch will allocate to the
port. This may be based on a static maximum that has been assigned, or the power class of the
device.

The Camera column indicates which camera is associated with the port.
To modify settings for a port, select the port from the table by clicking on it. Information about the
port will appear in the panel at the lower right.
C613-02090-00 REV A Allied Telesis Milestone Integration Plug-In User Guide
Usage
Page 18