Table of Contents
Advertisement
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC400 Card Installation Guide
modules.
Use a fiber optic tester to test whether the optical signal is too weak
(i.e., sensitivity) or too strong (i.e., maximum input power). The
operating specifications of the fiber optic transceivers are shipped
with the units.
Check the two strands of the fiber optic cable to be sure that the
receive fiber connector is connected to the transmit connector on
the remote end node, and that the transmit fiber connector is
connected to the receive connector on the end node.
229
Advertisement
Table of Contents
