At-Sbx81Xlem/Xs8 Expansion Module; Led; Figure 27: At-Sbx81Xlem/Xs8 Expansion Module; Table 15. Slot Leds On The At-Sbx81Xlem/Xs8 Module - Allied Telesis AT-SBx81CFC400 Installation Manual

AT-SBx81XLEM/XS8 Expansion Module

LED

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC400 Card Installation Guide
The AT-SBx81XLEM/XS8 Module is another expansion module for the
AT-SBx81XLEM Line Card. Refer to Figure 27.
Figure 27. AT-SBx81XLEM/XS8 Expansion Module
The main features of the module are listed here:
 Eight slots for 1Gbps SFP or 10Gbps SFP+ transceivers
 Supports 10GBase-SR/LR fiber optic transceivers
 Supports AT-SP10TW direct connect twinax cables with SFP+
transceiver-style connectors

Supports 1000Base-SX/LX fiber optic transceivers
 Supports 1000Base-BX bidirectional (BiDi) fiber optic transceivers
 Supports 1000Base-T twisted pair transceivers (full-duplex mode
only)
 Port Link/Activity (L/A) LEDs
 Jumbo frame support up to 10240 bytes
For a list of supported transceivers, refer to the SwitchBlade x8100 data
sheet on the Allied Telesis web site.
Each slot has one LED. The LED states are defined in Table 15.

Table 15. Slot LEDs on the AT-SBx81XLEM/XS8 Module

LED State
Solid Amber
Blinking Amber
Solid Green
Description
The SFP transceiver in the slot has established a
1Gbps link to a network device.
The transceiver is transmitting and/or receiving
data at 1Gbps.
The transceiver in the slot has established a
10Gbps link to a network device.
55