AT-SBx81GS24a SFP Line Card
LEDs
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC400 Card Installation Guide
The AT-SBx81GS24a SFP Line Card, shown in Figure 19, is a Gigabit
Ethernet switch.
Figure 19. AT-SBx81GS24a SFP Line Card
Here are the main features of the line card:
24 slots for small form-factor pluggable (SFP) transceivers
Supports 100Base-FX and 1000Base-SX/LX fiber optic
transceivers
Supports 100Base-BX and 1000Base-BX bidirectional (BiDi) fiber
optic transceivers
Supports 10/100/1000Base-T and 1000Base-T twisted pair
transceivers
Port Link/Activity (L/A) LEDs
32K entry MAC address table
24 Mb buffer memory
Jumbo frame support:
– 9710 bytes for ports operating at 10 or 100 Mbps.
– 10240 bytes for ports operating at 1000 Mbps
Non-blocking full wire speed switching on all packet sizes, with two
AT-SBx81CFC400 Controller Fabric Cards.
Hot swappable
Contact your Allied Telesis sales representative for a list of supported
transceivers.
The SFP slots on the AT-SBx81GS24a SFP Line Card have one LED
each, as shown in Figure 20 on page 46 and described in Table 10 on
page 46.
45