Table of Contents
Advertisement
Chapter 5: Installing the Chassis in an Equipment Rack
Unpacking the AT-SBx8112 Chassis
98
To unpack the AT-SBx8112 Chassis, perform the following procedure:
1. Remove all components from the shipping package.
2. Verify the contents of the shipping container by referring to Figure 34
here and Figure 35 on page 99. If any item is missing or damaged,
contact your Allied Telesis sales representative for assistance.
Figure 34. Components of the AT-SBx8112 Chassis
One AT-SBx8112 Chassis
One AT-SBxFAN12 Module pre-
installed in the vertical slot on
the right side of the front panel
Ten blank line card slot covers
Three blank power supply slot
covers pre-installed in power
supply slots A to C on the front
panel
One grounding lug pre-installed
in the lower left corner on the
back panel
Advertisement
Table of Contents
