At-Sbx81Xlem/Gt8 Expansion Module; Leds; Figure 25: At-Sbx81Xlem/Gt8Expansion Module - Allied Telesis AT-SBx81CFC400 Installation Manual

AT-SBx81XLEM/GT8 Expansion Module

LEDs

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC400 Card Installation Guide
The AT-SBx81XLEM/GT8 Module is an expansion module for the AT-
SBx81XLEM Line Card. Refer to Figure 25.
Figure 25. AT-SBx81XLEM/GT8Expansion Module
The main features of the module are listed here:
 Eight 10/100/1000Base-T ports
 RJ-45 connectors for twisted pair cables
 100 meters (328 feet) maximum operating distance per port
 Auto-Negotiation for speed
 Automatic MDIX detection for ports operating at 10/100Base-TX,
(Automatic MDIX detection does not apply to 1000Base-T
operation.)
 Port Link/Activity (L/A) LEDs
 Jumbo frame support: of 10240 bytes for ports operating at 10,
100, or 1000 Mbps
 Non-blocking full wire speed switching on all packet sizes, with two
AT-SBx81CFC400 Controller Fabric Cards
 Full-duplex mode at 10, 100, or 1000 Mbps
Note
The AT-SBx81XLEM/GT8 Expansion Module does not support half-
duplex mode.
The ports on the AT-SBx81XLEM/GT8 Expansion Module have two LEDs.
The LEDs are described in Table 13 on page 52.
51