Table of Contents
Advertisement
Chapter 5: Installing the Chassis in an Equipment Rack
Required Tools and Material
94
Here is a list of the tools and screws for mounting the chassis in an
equipment rack:
#2 Phillips-head screwdriver
Eight equipment rack screws
#2 Phillips-head 10 inch-lbs torque screwdriver (optional)
Here is a list of the tools and wire for installing the grounding wire on the
chassis:
#2 Phillips-head screwdriver
Crimping tool
10 AWG stranded grounding wire
#2 Phillips-head 20 inch-lbs torque screwdriver (optional)
Warning
The chassis may be heavy and awkward to lift. Allied Telesis
recommends that you get assistance when mounting the chassis in
an equipment rack. E30
Advertisement
Table of Contents
