Table of Contents
Advertisement
USB Port
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC400 Card Installation Guide
The USB port supports a flash drive. You may use a flash drive to perform
the following management functions:
Use Allied Telesis Management Framework to provide a
centralized network backup location.
Store backup copies of the configuration files on the AT-
SBx81CFC400 Controller Fabric Card.
Transfer configuration files between controller cards in different
chassis that are to have similar configurations.
Transfer release and GUI files between controller cards.
Store or transfer log files.
Store or transfer debug files (for example, the output of the SHOW
TECH-SUPPORT command).
Boot the AlliedWare Plus Operating System and master
configuration file from flash drive.
The port is compatible with USB v1.0 and v2.0 flash drives. Operating the
controller card with a flash drive is optional.
81
Advertisement
Table of Contents
