Figure 140: Initialization Messages - Allied Telesis AT-SBx81CFC400 Installation Manual

Layer 3+ chassis switch
Table of Contents

Advertisement

Verifying release... OK
Booting...
Starting base/first...
Mounting virtual filesystems...
Allied Telesis Inc.
AlliedWare Plus (TM) v5.4.2
Current release filename: SBx81CFC400-5.4.2.rel
Original release filename: SBx81CFC400-5.4.2.rel
Built: Tue Oct 11 16:36:59 NZDT 2011 by: maker@maker06-build
Mounting static filesystems...
Checking flash filesystem...
Mounting flash filesystem...
Checking for last gasp debug output...
Checking NVS filesystem...
Mounting NVS filesystem...
Starting base/rename-eth...
Starting base/arm_sysctl...
Starting base/dbus...
Starting base/syslog...
Starting base/lif_ok...
.
.
.
Received event modules.done
Received event board.inserted
Received event hardware.done
Starting network/startup...
Starting network/stackd...
Starting network/election.timeout...
Received event network.enabled
Initializing HA processes:
08:24:38 awplus-5 chassis[1492]: Card 6 (AT-SBx81CFC400) has joined chassis
08:24:40 awplus-5 chassis[1492]: Card 6 (AT-SBx81CFC400) has become the
Active C
08:24:40 awplus-5 chassis[1492]: Card 12 (AT-SBx81XZ4) has joined chassis
08:24:40 awplus-5 chassis[1492]: Card 10 (AT-SBx81GP24) has joined chassis
08:24:40 awplus-5 chassis[1492]: Card 2 (AT-SBx81GP24) has joined chassis
08:24:40 awplus-5 chassis[1492]: Card 4 (AT-SBx81GP24) has joined chassis
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC400 Card Installation Guide
forwarding network traffic when the Console port displays the "awplus
login" prompt.
Figure 140. Initialization Messages
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
209

Advertisement

Table of Contents
loading

This manual is also suitable for:

Switchblade x8112

Table of Contents