Table of Contents
Advertisement
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC400 Card Installation Guide
Removing the Shipping Brace
Now that the chassis is installed in the equipment rack, you may remove
the shipping brace from the front of the unit. To remove the shipping brace,
remove the six mounting screws with a #2 Phillips-head screwdriver (not
provided). Refer to Figure 40.
Shipping Brace Screws
Figure 40. Removing the Shipping Brace
After removing the shipping plate, go to "Installing the Chassis Grounding
Wire" on page 106.
105
Advertisement
Table of Contents
