Data Acquisition and Sample Analysis
Configuring Acquisition Settings
Configuring Acquisition Settings
Changing the Tube Name
To change the name of a new sample tube or the sample ID, right-click the tube name or the sample
ID name in the Tube section of the screen and select
tube or sample ID name.
Laser Settings
To access the Laser Setting window, select
appears. Refer to
NOTE
The instrument must be in Standby mode to access the Laser Setting window.
6-38
Figure
6.9.
or simply double-click the sample
Edit Name
Advanced
Laser Setting
>
. The Laser Setting window
B49006AS