Running Program 0 With A Second Program; Editing Settings During The Delayed Start Run - Beckman Coulter Optima L Series Instructions For Use Manual

Running Program 0 with a Second Program

To run program 0 followed by another program, do the following.
1
Press
PROG
• A blinking zero will appear above the
• The display area will show the existing settings for program
2
Use the keypad to select a second program from the stored programs.
The program settings selected will appear in the display and the program number will appear
in the
PROG
a. Press
3
To begin the delayed start program function, press
• The word "
selected will appear in the
• When the time in program

Editing Settings During the Delayed Start Run

NOTE
If you change a run setting during program
the instrument is no longer in the program mode. The instrument will stop at the end of program
1
To edit a setting during the run (without permanently changing the program), use the
parameter keys and keypad as described above.
a. Then press
b. Do NOT press
• The instrument will run using the modified settings.
• The lighted number above the
PN LL-IM-12AB
then on the keypad to access program
0
display.
.
ENTER/RECALL
" will appear in the
delay
PROG
0
Example: To run programs 0 and 3:
— Press PROG, 0, 3, and ENTER/RECALL.
— Press ENTER/RECALL and START.
.
ENTER/RECALL
.
SAVE
no longer running from program memory.
.
0
key.
PROG
ENTER/RECALL
display and the second program number you
SPEED
display.
reaches zero, the second program will begin automatically.
, the second program is automatically canceled because
0
key will go out to indicate that the instrument is
PROG
Run Preparation
Delayed Start Program Function
.
0
and .
START
0
2
.
2-11