Beckman Coulter CytoFLEX Instructions For Use Manual page 125

6
Enter the Mix time.
NOTE
The default setting is 5 seconds in Standard Mixing Mode. The default setting is 10 seconds (for
0.5 mL sample) in Deep Well Mixing Mode. You might need custom the Mix time according to the
sample volume.
7
Place the new plate on the plate holder.
8
Select
Calibrate
Plate Loader]
NOTE
It is required to calibrate the plate position when adding a new plate.
B49006AS
to calibrate the plate position. Refer to
in CHAPTER 12, Replacement/Adjustment
Using the CytExpert Software
Plate Type Library
Calibrating the Plate Position [With
Procedures.
2
2-39