Collecting Qc Data - Beckman Coulter CytoFLEX Instructions For Use Manual

Instrument Quality Control and Standardization
Quality Control
13
Select
Close

Collecting QC Data

QC data and reports are saved by default. Select
change the default save settings or modify the file path these files are saved to.
1
Double-click
a. Ensure that the
green.
b. If the icon is not green, ensure that the Cytometer USB is securely connected to the
Workstation and restart the Workstation.
2
Verify the detector configuration. Refer to
Configuration
NOTE
Ensure that the instrument configuration is properly configured for the QC experiment. The QC
experiment may not be completed or may end in erroneous results if incorrect settings are chosen.
Beckman Coulter recommends using the factory configuration and ensuring that the proper optical
filters are in place.
3
Verify the laser settings. Refer to
Analysis.
5-12
to exit the Target Library window.
to start the CytExpert software.
icon on the Status Bar near the bottom-left side of the display is
Connected
in CHAPTER 6, Data Acquisition and Sample
Laser Settings
QC/Standardization Setting
Verifying, Selecting, Editing, and Creating Detector
Analysis.
in CHAPTER 6, Data Acquisition and Sample
in the Settings menu to
B49006AS