2
Select the plate type to duplicate, and select
appears.
3
Enter the Mix setting.
4
Optional: Enter any remarks.
5
Optional: Select
[With Plate Loader]
The Calibration can be performed at any time. The duplication retains the calibration
information if the original plate was already calibrated.
6
Select
OK
B49006AS
to calibrate the plate position. Refer to
Calibrate
in
CHAPTER 12, Replacement/Adjustment Procedures
.
Using the CytExpert Software
. The Duplicate Plate Type window
Duplicate
Calibrating the Plate Position
2
Plate Type Library
2-43