Beckman Coulter CytoFLEX Instructions For Use Manual page 241

2) Select whether to display the axes in logarithmic or linear format for both the X-axis
3) Select
f. You can adjust axis ranges using the pan axis display controls located at the top of the
screen.
• Select
B49006AS
and Y-axis. Enter a value for log-linear coefficient if the log-linear view is desired.
.
Close
Or
Select the logarithmic axis on the plot. The slider appears. Drag the slider along the
axis to change the log-linear coefficient and view events that are not shown, including
events with negative values.
NOTE
The log-linear slider is also available during data acquisition.
NOTE
To reset the axis back to logarithmic, right-click on the axis and select Property. Select
X axis Default or Y axis Default to reset the axis.
Histogram with logarithmic
Dot plot with logarithmic
, to zoom-in and define which area of a plot to enlarge. The selected area
can be magnified to fill the entire graph. By selecting the zoom-out function, you can
click on the graph and restore the plot to its original appearance before magnification.
Data Acquisition and Sample Analysis
Creating an Experiment
Histogram with log-linear
Dot plot with log-linear
6
6-23