Beckman Coulter CytoFLEX Instructions For Use Manual page 220

Data Acquisition and Sample Analysis
Creating an Experiment
3
Verify the laser settings. Refer to
Analysis.
4
Create or open an experiment using one of the following methods:
• Create a new experiment:
— Select
— Select
• Create a new experiment from a template:
— Select
— Select
— Select the Template tab on the Start page and select the template from the list of
• Open an existing experiment:
— If you are using either the CytExpert Default Software Option or the CytExpert User
— If you are using either the CytExpert Default Software Option or the CytExpert User
— If you are using either the CytExpert Default Software Option or the CytExpert User
NOTE
Experiments are saved as an .xit file. Template are saved as an .xitm file.
6-2
on the Start page, specify the file path, and save the experiment.
New Experiment
Or
in the File menu, specify the file path, and save the experiment.
New Experiment
New Experiment from Template
Experiment and specify the file path for the new experiment, then select
to Template and specify the file path to the existing template.
Or
New Experiment from Template
the experiment.
Or
recently used templates. Specify the file path and save the experiment.
Management Software Option: Select
file path and save the experiment.
If you are using the CytExpert Electronic Record Management Software Option: Select
on the Start page, specify the experiment file and open the
Open Experiment
experiment.
Or
Management Software Option: Select
path and save the experiment.
If you are using the CytExpert Electronic Record Management Software Option: Select
in the File menu, specify the experiment file and open the
Open Experiment
experiment.
Or
Management Software Option: Select the Experiment tab on the Start page and select
the experiment from the list of recently opened experiments. Specify the file path and
save the experiment.
If you are using the CytExpert Electronic Record Management Software Option: Select
the Experiment tab on the Start page and select the experiment from the list of
recently opened experiments. Specify the experiment file and open the experiment.
Laser Settings in CHAPTER 6, Data Acquisition and Sample
on the Start page. Select
in the File menu, specify the file path and save
Open Experiment
Open Experiment
next to New
Browse
Browse
on the Start page, specify the
in the File menu, specify the
B49006AS
next