Beckman Coulter CytoFLEX Instructions For Use Manual page 228

Data Acquisition and Sample Analysis
Creating an Experiment
1
Left-click and drag your mouse to highlight the desired wells or hold the Control key and select
each desired well.
2
Select
Wells window appears.
NOTE
Select
3
Enter the name in the Prefix box in the Naming Rules section of the window.
4
Select the desired Mix and Backflush duration from the Mix/Backflush section of the window.
5
Enter the Group Name in the Name box in the Group section of the window.
6
Select the sample well color using the color dropdown under the Group section of the window.
6-10
or right-click the selected wells and select
or right-click and select Set as Empty Wells to reset selected wells as empty.
. The Set As Sample
Set As Sample Wells
B49006AS